stainless steel plate
Stainless steel plate is a kind of plate with smooth surface, much higher plasticity, toughness and mechanical strength. And it has strong corrosion resistance to acid, alkaline gas, solution and other media. Though stainless steel is a kind of alloy steel not easy to rust, it is not absolutely. Stainless steel plate is widely applied in chemical, food, medicine, papermaking, oil and atomic energy industry together with construction, kitchenware, tableware, automobile, household appliances etc. Anson steel has a great share in stainless steel sheet manufacturing in Chinese market. Therefore, we have a quantity of supply capacity to meet your purchase.
Stainless Steel Plate
Stainless steel sheet has the similar ability to resist the general corrosion with unstable nickel-chromium alloy 304. Long-time heating in the temperature range of chromium carbide may affect alloy 321 and 347. High temperature applications require materials with strong sensitization resistance in order to prevent intergranular corrosion at low temperature. Also stainless steel plate has high temperature oxidation resistance; however, oxidation rate is influenced by the environmental exposure and natural factors like product form.
Stainless Steel Sheets at Anson Steel
International Stainless Steel Marking Ways:
The American institute of steel is to mark all kinds of standard level in the three figures wrought stainless steel.
Austenite stainless steel designation in 200 and 300 series;
Ferrite and martensite stainless steel designation in 400 series;
Ferrite stainless is marked in 430 and 446; Martensite stainless is marked in 410, 420 and 440c.
| Grade | Mark | Chemical Compositions(%) | ||||||||||
| C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Others | ||
| 301 | 1Cr17Ni7 | ≤0.15 |
16.00- 18.00 |
6.00- 8.00 |
≤2.00 | ≤0.065 | ≤0.03 | - | ≤1.00 | - | - | - |
| 302 | 1Cr18Ni9 | ≤0.15 |
17.00- 19.00 |
8.00- 10.00 |
≤2.00 | ≤0.035 | ≤0.03 | - | ≤1.00 | - | - | - |
| 303 | Y1Cr18Ni9 | ≤0.15 |
17.00- 19.00 |
8.00- 10.00 |
≤2.00 | ≤0.20 | ≤0.03 | 1) | ≤1.00 | - | - | - |
| 303se |
Y1Cr18Ni 9Se |
≤0.15 |
17.00- 19.00 |
8.00- 10.00 |
≤2.00 | ≤0.20 | ≤0.03 | - | ≤1.00 | - | - | Se≥0.15 |
| 304 | 0Cr18Ni9 | ≤0.07 |
17.00- 19.00 |
8.00- 10.00 |
≤2.00 | ≤0.035 | ≤0.03 | - | ≤1.00 | - | - | - |
| 304L | 00Cr19Ni10 | ≤0.03 |
18.00- 20.00 |
8.00- 10.00 |
≤2.00 | ≤0.035 | ≤0.03 | - | ≤1.00 | - | - | - |
| 304N1 | 0Cr19Ni9N | ≤0.08 |
18.00- 20.00 |
7.00- 10.50 |
≤2.00 | ≤0.035 | ≤0.03 | - | ≤1.00 | - |
0.10- 0.25 |
- |
| 304N2 |
0Cr18Ni 10NbN |
≤0.08 |
18.00- 20.00 |
7.00- 10.50 |
≤2.00 | ≤0.035 | ≤0.03 | - | ≤1.00 | - |
0.15- 0.30 |
Nb≤0.15 |
| 304LN |
00Cr18Ni 10N |
≤0.03 |
17.00- 19.00 |
8.50- 11.50 |
≤2.00 | ≤0.035 | ≤0.03 | - | ≤1.00 | - |
0.12- 0.22 |
- |
| 305 | 1Cr18Ni12 | ≤0.12 |
17.00- 19.00 |
10.50- 13.00 |
≤2.00 | ≤0.035 | ≤0.03 | - | ≤1.00 | - | - | |
| 309S | 0Cr23Ni13 | ≤0.08 |
22.00- 24.00 |
12.00- 15.00 |
≤2.00 | ≤0.035 | ≤0.03 | - | ≤1.00 | - | - | |
| 310S | 0Cr25Ni20 | ≤0.08 |
24.00- 26.00 |
19.00- 22.00 |
≤2.00 | ≤0.035 | ≤0.03 | - | ≤1.00 | - | - | - |
| 316 |
0Cr17Ni 12Mo2 |
≤0.08 |
16.00- 18.50 |
10.00- 14.00 |
≤2.00 | ≤0.035 | ≤0.03 |
2.00- 3.00 |
≤1.00 | - | - | - |
|
1Cr18Ni 12Mo2Ti6) |
≤0.12 |
16.00- 19.00 |
10.00- 14.00 |
≤2.00 | ≤0.035 | ≤0.03 |
1.80- 2.50 |
≤1.00 | - | - |
Ti5 (C%-0.02)~ 0.08 |
|
|
0Cr18Ni 12Mo2Ti |
≤0.08 |
16.00- 19.00 |
10.00- 14.00 |
≤2.00 | ≤0.035 | ≤0.03 |
1.80- 2.50 |
≤1.00 | - | - |
Ti5*C%- 0.70 |
|
| 316L |
00Cr17Ni 14Mo2 |
≤0.03 |
16.00- 18.00 |
12.00- 15.00 |
≤2.00 | ≤0.035 | ≤0.03 |
2.00- 3.00 |
≤1.00 | - | - | - |
| 316N |
0Cr17Ni 12Mo2N |
≤0.08 |
16.00- 18.00 |
10.00- 14.00 |
≤2.00 | ≤0.035 | ≤0.03 |
2.00- 3.00 |
≤1.00 | - | - | - |
| 316N |
00Cr17Ni 13Mo2N |
≤0.03 |
16.00- 18.50 |
10.50- 14.50 |
≤2.00 | ≤0.035 | ≤0.03 |
2.00- 3.00 |
≤1.00 | - | - | - |
| 316J1 |
0Cr18Ni 12Mo2Cu2 |
≤0.08 |
17.00- 19.00 |
10.50- 14.50 |
≤2.00 | ≤0.035 | ≤0.03 |
1.20- 2.75 |
≤1.00 |
1.00- 2.50 |
- | - |
| 316J1L |
00Cr18Ni 14Mo2Cu2 |
≤0.03 |
17.00- 19.00 |
12.00- 16.00 |
≤2.00 | ≤0.035 | ≤0.03 |
1.20- 2.75 |
≤1.00 |
1.00- 2.50 |
- | - |
some features of Q235 steel
Q235 is an ordinary carbon structure steel which is the material of steel. Q represents the material yield limit; 235 is referred to the material yield value about 235mpa. And with the increase of the material thickness, the yield value wil...
high quality ASTM A516 Grade 70 steel
ASTM A516 Grade 70 steel excellent at low temperature and good notch toughness is one of the most proper steels for heat exchanger, boilers and pressure vessels. ASTM A516 Grade70 steel plate is mainly used in a large number of pressure appl...
the requirements of pressure vessel steel plate
Applied in the manufacturing of pressure vessel steel should be able to adapt to the container conditions like temperature, pressure and characteristic of medium etc. and is good to container manufacturing and quality assurance. There are s...
