DIN 1629

DIN1629 is the standard of the seamless circular pipes non-alloy steels with special quality requirements. The main steel grades contain DIN1629 ST37.0, DIN1629 ST44.0 and DIN1629 ST52.0.

DIN1629 Seamless Steel Pipe
DIN1629-seamless steel pipe

Outer dimensions: 6.00mm-219.0mm
Wall thickness: 1.0mm-30.0mm
Length: max 12000mm

Applications: DIN1629 requires seamless steel pipe is used for manufacturing pipeline, vessel, equipment and pipe fittings.
Packing: Bare/bundles/crates/crate protection at the both sides of tubes or as per customers’ requirements.
Painting: Just as customers’ required!

Chemical Composition(%):

Standard Grade C Si Mn P S Cr Ni Cu
DIN1629 St37.0 ≤0.17 0.17-0.37 0.35-0.65 ≤0.025 ≤0.020 ≤0.25 ≤0.25 ≤0.25
St44.0 ≤0.21 0.17-0.37 0.50-0.80 ≤0.025 ≤0.020 ≤0.25 ≤0.25 ≤0.25
St55 0.33-0.41 0.17-0.37 0.50-0.80 ≤0.025 ≤0.020 ≤0.25 ≤0.25 ≤0.25
St52.0 ≤0.22 ≤0.55 ≤1.60 ≤0.025 ≤0.020 ≤0.25 ≤0.25 ≤0.25

Mechanical Properties:

Grade Tensile strength Yield strength (Mpa)
not less than
Elongation (%)
not less than
≤16mm >16mm
St37.0 350-480 235 225 25
St44.0 420-550 275 265 21
St55 540-645 295 285 17
St52.0 500-650 355 345 21

some features of Q235 steel some features of Q235 steel
Q235 is an ordinary carbon structure steel which is the material of steel. Q represents the material yield limit; 235 is referred to the material yield value about 235mpa. And with the increase of the material thickness, the yield value wil...
high quality ASTM A516 Grade 70 steel high quality ASTM A516 Grade 70 steel
ASTM A516 Grade 70 steel excellent at low temperature and good notch toughness is one of the most proper steels for heat exchanger, boilers and pressure vessels. ASTM A516 Grade70 steel plate is mainly used in a large number of pressure appl...
the requirements of pressure vessel steel plate the requirements of pressure vessel steel plate
Applied in the manufacturing of pressure vessel steel should be able to adapt to the container conditions like temperature, pressure and characteristic of medium etc. and is good to container manufacturing and quality assurance. There are s...